
Page 16
Customer Care Center
1-800-898-1879
www.askona.com
ASKO - DISHWASHER
Appliance Installation Checklist
• Remove packaging and check for cosmetic damages.
• Remove the information packets from inside the dishwasher.
•
Attach any accessories as required by the installation. Fill strips, light shielding
film, supplied door sealing...
•
Attach the drain line using the largest section of the disposer boot allowable.
Leave the high loop in place.
• Attach the PEX fill hose. Don’t forget to use the O-ring.
• Plug the dishwasher into the wall.
• Turn on the water and check the fill line connections for leaks.
• Slide the unit into the cabinet and level the machine front to rear, and left to right.
• Mount the unit to the cabinet.
•
Turn the power to the unit on and start a cycle. Make sure there are no drain
leaks.
•
Show the customer their warranty card, and help them locate the model and
serial number on the unit.
• Leave all user books for consumer.
INSTALLATION CHECKLIST
Art. No 461328 Rev. 01
461328 Install DW90 USA EN Rev 01.indd 16 2014-01-16 10:26:09
Comentários a estes Manuais